Get started

Levels

Pivot LevelsThis indicator automatically plots 3 important "Pivot Levels" to watch when day trading. This simple but effective tool plots out important levels from the prior trading day, and updates every day. I noticed that significant levels such as the close, the high, and the low from the prior day often serve as important support/resistance levels in the future. The previous day high is displayed as the green line, the close is displayed as the white line, and the low is plotted as the red line. Enjoy!
Pine Script® indicator
by HBtrader22
Synthetic Levels indicator v.2.0“Synthetic Levels” Indicator 2.0 Class : graphic patterns Trading type : reversal trading Time frame : any Purpose : detection of levels Level of aggressiveness : standard The “Synthetic Levels” indicator is designed to determine synthetic levels both support and resistance. Synthetic levels are price zones where the most likely prices will change direction, but these zones are not obtained by determining chart patterns, they are the result of specific calculations. Levels are determined based on a unique author's algorithm, which includes the most common techniques for determining levels: pivots, fractals, fibo levels, as well as extreme points approach. By processing and comparing the values of support / resistance levels generated by different technics (see the list above), the “Synthetic Levels” indicator determines the actual price parameters of the support / resistance levels, as well as their power at a particular point in time. The “Synthetic Levels” indicator displays three variants of support and resistance lines, which allows the trader to independently regulate the level of aggressiveness of the trading strategy, and can also can be used to build new trading strategies based on averaging and Martingale. The information provided by the “Synthetic Levels” indicator can also be used to determine entry points (sell from resistance levels and buy from support levels), as well as to determine stop-losses and take-profits. Stops for buying are set below the support levels, and for sells - above the resistance levels. Profits for buys can be placed near the resistance lines, and for sells - in front of support lines. The level power (displayed as a numerical value from 1 to 4 near each level line) allows to determine the trade volume of the position. The higher the power of the level is, the more aggressive the volume can be entered into the transaction. The power of a level is determined by the number of coincidences of the values of the levels calculated by different techniques. For example, if at some point the calculated values of the support level based on the “Pivots” technique turned out to be equal to the values obtained by the “Fractals” technique, the level power will be 2. !!! IMPORTANT !!! Although the level looks like a line, that is a specific price, but in fact it is not so. The level line is rather a starting point for the formation of a price zone where prices will change the direction. To detect trend activation points “Synthetic Levels” indicator 2.0 has double signal block: the first determines the medium-term market sentiment to the asset; the second is responsible for assessing the current market sentiment. Structure of the indicator Indicator consists of the following elements: - Support lines incl. their power – 3 blue lines. Each of them displays variant of support line. The power of the level is displayed near the level line. - Resistance lines incl. their power – 3 red lines. Each of them displays variant of resistance line. The power of the level is displayed near the level line. - trend line – is designed for color indication of the current dominant tendency. If the color of the signal line is red, it means that the downward trend prevails, blue is for upward, and green is for flat. Accordingly, the trader should adjust his/her actions based on this information: search for sell opportunities and not buy if the line is red; search for purchases and not sell if the line is blue. Parameters of the indicator To configure the indicator, the following parameters are provided: - Fibo period (default value - 34) - period for determining the Fibo lines. The higher the value is, the deeper the Indicator will dig in past prices. - Period to calculate levels (default value - 13) - period for determining the levels used by Extreme points approach. The higher the value is, the deeper the Indicator will dig in past prices. - Error in pips (default value - 10) – size of the price zone where levels are treated as the same ones. - Trendline period (default value - 44) - period for determining the medium-term trend. The higher the value is, the more conservative the perception indicator of a trend will be. - Trend period (default value - 13) - period to determine the current trend. Responsible for the level of trade aggressiveness. The lower the value of this parameter, the more signals the indicator will generate and vice versa. - Trend error in pips (default value is 1) - this parameter is used to control the frequency of the signals. The lower it is, the more signals the indicator will generate.
Pine Script® indicator
by Trade24Fx
2
Long Term Levels (4h, D, W, M, Q, & Y)This shows and labels the highs and lows from the previous 4h, daily, weekly, monthly, quarterly and yearly session. By default it only shows weekly, monthly and yearly. It also has an option to use small labels (M vs Monthly High) to save your eyeballs. You may need to adjust your charts right hand margin to see them properly. Everything is shown in very tasteful shades of blue. For a faster loading version of this check my other indicators.
Pine Script® indicator
by scarf
22
Keltner ZonesThis is an indicator that draws support and resistance zones / levels based on price action in and around Keltner Channels. There are 3 different modes; Draw zones based on price breaking the upper band Draw zones based on price breaking the lower band Draw zones if price stays within the bands for a prolonged period of time. You can also decide if you want the indicator to paint zones or levels. The Zones can grow rather large if there is a volatility shock since they are drawn using the true range around the trigger price. Upper Band Zones Lower Band Zones Congestion Zone
Pine Script® indicator
by shtcoinr
8
Levels Generator with Fibs"Levels Generator with Fibs" is an easy to use and a well coded script that can be used by traders of all levels from beginners to advanced professionals. What does the script do? Plots the support and resistance levels automatically based on user preference of Local or Global levels from indicator settings. Plots Fibonacci retracement levels between high and low based on 'Days' or 'Candles' lookback from indicator settings. What markets can this script be used on? Forex Stocks Commodities Cryptocurrencies and almost any asset on Trading View Does the script repaint levels? No. The script does not repaint as it plots levels based on the past price movement. The only time the levels change for a given timeframe is when the price makes a new All Time High or a new All Time Low. What is the difference between "Plot Levels" and "Plot Fibonacci Levels"? "Plot Levels" plots support and resistance levels automatically without any input from the user other than preferred levels 'plot' from the indicator settings namely Plot All Global Levels - Plots all important levels from ATH to ATL (dependent on data age/availability on Trading View) - recommended for Long term outlook Plot Local Levels for Higher TF - Plots all important Support/Resistance levels for mostly higher time frames (1hr or higher) - Short to Mid term outlook Plot Local Levels for Lower TF - Plots all important Support/Resistance levels for mostly smaller time frames (can be used for up to 1hr in most cases) - Recommended for Scalping/Swing Trading mostly dependent on volatility "Plot Fibonacci Levels" plots all standard Fibonacci retracement levels - 0, 23.6%, 38.2%, 50%, 61.8%, 78.6% and 100% based on "Days" Lookback - Fibonacci levels between High and Low based on number of days in the past, starting from the current day on any time frame chart "Candles" Lookback - Fibonacci levels between High and Low based on number of candles in the past, starting from the current candle on any time frame chart Can the Fibonacci levels be reversed? Yes. The Fibonacci levels can be reversed by checking the "Reverse" checkbox from the indicator settings. This is very handy if the trend looks like there may be a support or resistance from one of the Fib levels and a possibility of a new high or a new low based on the price action. What is the need for "Plot 1.272 Fibonacci Level" under "Plot Fibonacci Levels"? 1.272 is an important Fibonacci number as it is the square root of 1.618 and is the near support or resistance after 100% price retracement. Even though it keeps moving on the chart dependent on the new high or new low based on Days/Candles lookback, it serves as a 'nice to have' reference for any trader looking beyond 100% retracement for support/resistance. Why do the 'local levels' lines' color changes between green and red? The nearby levels lines change color based on price closing above or below them. This happens to only closest local levels for lower TF near price action and for top/bottom lines of the local levels for higher TF. The line turns green when it becomes support as price closes above it. The line turns red when it becomes resistance as price closes below it. Can the levels lines' colors be changed? Yes. The color of the Higher TF levels and all Global levels (from "Plot All Global Levels") can be changed from the 'Styles' tab from the indicator settings. Some lines change between green and red (which show on both light and dark themed background), so they are not editable and are hidden, but all other lines can be edited to show /hide or change color from the 'Styles' tab on the indicator settings. What chart background is recommended? The colors of the levels are neutral to both light and dark background of the chart screen, but a black or a dark background shows the lines even better. It comes down to user preference. If the default horizontal and vertical lines on chart screen is of no use, it can be hidden from 'Background' tab on Trading View chart settings by increasing the transparency of the lines all the way up. Get in touch with me if you would like access to the script on monthly, 6 monthly or annual basis.
Pine Script® indicator
by TradeChartist
5
Confidence IntervalsThis indicator allows you to be able to see the confidence intervals for whatever asset you are trading given a certain expiry. Confidence intervals project the most probable price ranges over a certain period of time in the future. In order to use this you must first specify what expiry you want to use in days, so if you want to project the confidence interval 1 day out you would input 1, if you want 1 year out you'd input 252 (the number of trading days in 1 year), if you want 12hrs out you'd input 0.5. Next you must specify what timeframe you are using on your chart in minutes, so if you're using 5 min chart you'd input 5, if you're using 4hr you'd input 240, if you're using daily charts you'd use 1440. Finally you must input what standard deviation you want to use for the confidence range. Confidence levels are really helpful in trading, especially for options, because it allows you to be able to choose a more strategic expiry based on probabilities. In other types of trading such as stocks, futures, and FX confidence levels can be helpful in helping you better plan out your trade by figuring out where price probably will and will not go given a certain period of time in the future. Additionally, confidence levels allow you to be able to visualize volatility expansion and contraction. Standard Deviation Probabilities: 0.5 STD has a 99% of touching the bounds of the interval and a 50% chance of closing beyond the bounds (these probabilities are not predicated on a certain direction, if you pick a certain direction divide these probabilities by 2) 1 STD has a 64% of touching the bounds of the interval and a ~30-32% chance of closing beyond the bounds (these probabilities are not predicated on a certain direction, if you pick a certain direction divide these probabilities by 2) 1.6 STD has a ~40% of touching the bounds of the interval and a ~20% chance of closing beyond the bounds (these probabilities are not predicated on a certain direction, if you pick a certain direction divide these probabilities by 2) 2 STD has a ~10% of touching the bounds of the interval and a ~5% chance of closing beyond the bounds (these probabilities are not predicated on a certain direction, if you pick a certain direction divide these probabilities by 2) 3 STD has a <2% of touching the bounds of the interval and a <1% chance of closing beyond the bounds (these probabilities are not predicated on a certain direction, if you pick a certain direction divide these probabilities by 2)
Pine Script® indicator
by SegaRKO
2
ZenTrading MTFA Support & Resistance_BETAThis is a multiple timeframe analysis indicator for the long term and swing trading timeframes (1HR upwards). The crosses indicate support/resistance levels. Current levels as well as past levels are relevant. This is a beta testing version of the indicator, there may be some minor issues, so use at your own risk. A day trading timeframe version is coming soon. If you have any questions feel free to contact me
Pine Script® indicator
by DariusZen
RSI Based Automatic Supply and DemandA script that draws supply and demand zones based on the RSI indicator. For example if RSI is under 30 a supply zone is drawn on the chart and extended for as long as there isn't a new crossunder 30. Same goes for above 70. The threshold which by default is set to 30, which means 30 is added to 0 and subtracted from 100 to give us the classic 30/70 threshold on RSI, can be set in the indicator settings. By only plotting the Demand Below Supply Above indicator you get automatic SD level that is updated every time RSI reaches either 30 or 70. If you plot the Resistance Zone / Support Zone you get an indicator that extends the zone instead of overwrite the earlier zone. Due to the zone being extended the chart can get a bit messy if there isn't a clear range going on. There is also a "confirmation bars" setting where you can tell the script how many bars under over 30 / 70 you want before a zone is drawn. Here is an image of only using the "Demand Below / Supply Above" plot. As you can see, this could be useful "Price Flow" indicator, where we would only short if a zone appears below another zone, or long if two zones in a row are going up, like stairs.
Pine Script® indicator
by shtcoinr
103
Zindarra Multi Alerts Advanced (8 Symbols, 8 Levels) by RRBZindarra Multi Alerts Advanced by RRB by RagingRocketBull 2018 Version 1.0 This indicator lets you configure multiple alert levels for several assets. Zindarra Multi Alerts Advanced supports 8 symbols with 8 custom alert levels. You can have an M:M relationship betweeen symbols and levels, for example: - 4 symbols each boxed by 2 alerts above/below the price - 3 symbols with 1 alert each - 2 symbols, 1st with 2 alerts, 2nd - with 6 alerts - 1 symbol with 8 alerts etc There are several versions: Simple, Pro, Advanced and Ultimate. This is the Advanced version. The Differences are listed below. - Simple: 10 Alert Levels, 1 plot mode, alert type: cross, no colors/triggered alerts - Pro: 9 Alert Levels, 2 plot modes: plot/price line, alert type: cross, +change/swap colors, +hide/disable triggered alerts, 2 penetration modes (close, high/low), trigger on confirmed close - Advanced: 8 Symbols/Tickers, 8 Alert Levels, +alert types: cross up/cross down, no color change. Display sources as lines/candles, normalize, scale/shift independently - Ultimate: 5 Symbols/Tickers, 8 Alert Levels, +alert types: volume/price %/abs change, volume/ema/time cross Features: - 8 custom symbols, symbols:levels = M:M - 8 custom alert levels with labels. For each alert there must be a corresponding non-empty symbol (can be a duplicate) - alert types: cross/cross up/cross down - normalize symbols (and alert levels) to 100% to compare, - scale and shift each symbol (and alert levels) to position on a chart independently - 1 alert levels plot mode: plot - 2 symbol types: line/candles - colorize symbol candles - high/low or close level penetration modes - show/hide levels/labels - keep or auto disable triggered alerts - trigger alerts only after a confirmed close You will see all symbols on a single chart at the same time with their corresponding alert levels. From this chart you can manage all alerts configured for multiple assets. Although TradingView has 2 percentage scale modes (Percent, Indexed to 100), somehow they still fail to be usefull when comparing multiple assets. This indicator lets you normalize all symbols to 100% making a direct single scale comparison between assets with vastly different price levels possible. All alert levels will be normalized as well. TradingView does not let you move the plots attached to left scale. When scaled they all remain stuck in the center and can't be moved vertically or relative to each other. This indicator lets you position all symbols independently using individual scale and shift settings. For example, you can: - split your screen in 3 horiz areas and have a symbol in each of them without overlapping or - have several partially overlapping assets with different scale each or - have all assets fully overlapping and normalized to the same 100% scale You have to manually create an alert in Manage Alerts Panel and configure it to use with this indicator. Free accounts are limited to only 1 alert slot and this indicator will take it (any existing alerts must be disabled/stopped). Once the alert is configured, the indicator can be removed from chart to free a slot for another indicator, but you won't see the alert levels. Usage: 1. attach indicator to a chart 2. define alert levels in UI settings 3. in TradingView's Manage Alerts panel on the right: - for free accounts: disable/stop all existing alerts, you are limited to 1 alert slot only. Otherwise you won't be able to save. - create a new Alert: - select 'Multi Alerts' indicator name in the Condition dropdown box, leave Level 1 and Multi Alerts Cross as default options - select 'Once Per Bar' or 'Once Per Minute' instead of 'Only Once' to trigger the alert multiple times 5. click Save. Your 9 alerts are enabled now. Change Settings: 1. change levels/settings in UI. Any changes will also reset already triggered levels visibility. 2. in Manage Alerts panel: - open/edit the alert you created - select new instance of 'Multi Alerts' indicator name in the Condition dropdown box (appears at the bottom) - check the Condition dropdown again - a single instance should remain selected. 3. click Save. Your alert settings are updated. Notes on using alerts: - attaching this indicator to a chart and configuring alert levels will not automatically enable the alerts - you have to manually create/configure a new alert in the Alerts Panel - removing this indicator from chart will not disable the alerts, you have to manually disable the alert you created in the Alerts Panel - your alert in the Alerts Panel uses another instance (copy) of indicator/settings. Any changes won't affect the alert. You have to manually update the alert every time you change any settings in the indicator. - recompiling and attaching your own version of indicator will require creating a new Alert (delete the old one). - alerts are designed to work in realtime. In replay mode you will see triggered alert levels hiding/changing colors but there will be no system alert messages. It's best to test the indicator in realtime on M1 (1 min) chart - you will only see 1 system alert per bar/60 sec when multiple alert levels are crossed with a single bar or across several symbols at the same time. However all of these levels will hide in the indicator as expected. - you can only see the alert levels when the indicator is attached to chart, they are not shown by the system alert. - For source=high/low a directional level penetration is used automatically (crossunder/low and crossover/high). For source=close a standard bidirectional cross is used unless another alert type is specified. - normalization breaks/distorts alert levels and symbol price - this is normal and is expected. To view the real price of alert levels uncheck normalize - the first 8 outputs are alert levels. Unnormalized levels are straight lines. - you will see alerts from all symbols in the system alert message box of the current symbol - a bit confusing, but there's no workaround, you can't have a customized alert message for each symbol/level - many tickers as arguments can stretch/break TradingView's Create New Alert dialog but it's still possible to push all required buttons and Save. - duplicate symbols will be displayed by default. You can manually hide duplicates using show/hide flags. - empty tickers (and corresponding alerts) are essentially disabled 1. uses plot*, cross*, barssince, highest, security, alertcondition
Pine Script® indicator
by RagingRocketBull
10
Zindarra Multi Alerts by RRBZindarra Multi Alerts by RRB by RagingRocketBull 2018 Version 1.0 This indicator lets you configure multiple alert levels for an asset. Zindarra Multi Alerts supports 10 custom alert levels. You have to manually create an alert in Manage Alerts Panel and configure it to use with this indicator. Free accounts are limited to only 1 alert slot and this indicator will take it (any existing alerts must be disabled/stopped). Once the alert is configured, the indicator can be removed from chart to free a slot for another indicator, but you won't see the alert levels. This is the Zindarra Multi Alerts Simple version. You can't auto disable already triggered alerts in this indicator. All alerts will remain active. If you want to be able to hide/disable/change color of the triggered alert levels use the Zindarra Multi Alerts Pro version. Features: - 10 custom alert levels with labels - set open/high/low/close source point for level penetration - show/hide levels/labels Usage: 1. attach indicator to a chart 2. define alert levels in UI settings 3. in TradingView's Manage Alerts panel on the right: - for free accounts: disable/stop all existing alerts, you are limited to 1 alert slot only. Otherwise you won't be able to save. - create a new Alert: - select 'Multi Alerts' indicator name in the Condition dropdown box, leave Level 1 and Multi Alerts Cross as default options - select 'Once Per Bar' or 'Once Per Minute' instead of 'Only Once' to trigger the alert multiple times 5. click Save. Your 9 alerts are enabled now. Change Settings: 1. change levels/settings in UI 2. in Manage Alerts panel: - open/edit the alert you created - select new instance of 'Multi Alerts' indicator name in the Condition dropdown box (appears at the bottom) - check the Condition dropdown again - a single instance should remain selected. 3. click Save. Your alert settings are updated. Notes on using alerts: - attaching this indicator to a chart and configuring alert levels will not automatically enable the alerts - you have to manually create/configure a new alert in the Alerts Panel - removing this indicator from chart will not disable the alerts, you have to manually disable the alert you created in the Alerts Panel - your alert in the Alerts Panel uses another instance (copy) of indicator/settings. Any changes won't affect the alert. You have to manually update the alert every time you change any settings in the indicator. - recompiling and attaching your own version of indicator will require creating a new Alert (delete the old one). - alerts are designed to work in realtime. In replay mode you will see only the alert levels but there will be no system alert messages. It's best to test the indicator in realtime on M1 (1 min) chart - you will only see 1 system alert per bar/60 sec when multiple alert levels are crossed with a single bar. - you can only see the alert levels when the indicator is attached to chart, they are not shown by the system alert. - a standard bidirectional cross is used for all penetration sources 1. uses plot*, cross*, alertcondition
Pine Script® indicator
by RagingRocketBull
2
Zindarra Multi Alerts Pro (9 Levels) by RRBZindarra Multi Alerts Pro by RRB by RagingRocketBull 2018 Version 1.0 This indicator lets you configure multiple alert levels for an asset. Zindarra Multi Alerts Pro supports 9 custom alert levels. You have to manually create an alert in Manage Alerts Panel and configure it to use with this indicator. Free accounts are limited to only 1 alert slot and this indicator will take it (any existing alerts must be disabled/stopped). Once the alert is configured, the indicator can be removed from chart to free a slot for another indicator, but you won't see the alert levels. If you want 10 alert levels and don't need colors and Pro features - use Multi Alerts Simple version instead. Features: - 9 custom alert levels with labels - 2 plot modes: plot and price line - high/low or close level penetration modes - show/hide levels/labels - change color based on level position above/below price - keep or auto disable triggered alerts - trigger alerts only after a confirmed close - swap level colors Usage: 1. attach indicator to a chart 2. define alert levels in UI settings 3. in TradingView's Manage Alerts panel on the right: - for free accounts: disable/stop all existing alerts, you are limited to 1 alert slot only. Otherwise you won't be able to save. - create a new Alert: - select 'Multi Alerts' indicator name in the Condition dropdown box, leave Level 1 and Multi Alerts Cross as default options - select 'Once Per Bar' or 'Once Per Minute' instead of 'Only Once' to trigger the alert multiple times 5. click Save. Your 9 alerts are enabled now. Change Settings: 1. change levels/settings in UI. Any changes will also reset already triggered level colors/visibility. 2. in Manage Alerts panel: - open/edit the alert you created - select new instance of 'Multi Alerts' indicator name in the Condition dropdown box (appears at the bottom) - check the Condition dropdown again - a single instance should remain selected. 3. click Save. Your alert settings are updated. Notes on using alerts: - attaching this indicator to a chart and configuring alert levels will not automatically enable the alerts - you have to manually create/configure a new alert in the Alerts Panel - removing this indicator from chart will not disable the alerts, you have to manually disable the alert you created in the Alerts Panel - your alert in the Alerts Panel uses another instance (copy) of indicator/settings. Any changes won't affect the alert. You have to manually update the alert every time you change any settings in the indicator. - recompiling and attaching your own version of indicator will require creating a new Alert (delete the old one). - alerts are designed to work in realtime. In replay mode you will see triggered alert levels hiding/changing colors but there will be no system alert messages. It's best to test the indicator in realtime on M1 (1 min) chart - you will only see 1 system alert per bar/60 sec when multiple alert levels are crossed with a single bar. However all of these levels will hide/change color in the indicator as expected. - plot modes: price line - changes color of the whole level, style is not configurable; plot - changes color of a level's segment after each cross, configurable style - you can only see the alert levels when the indicator is attached to chart, they are not shown by the system alert. - For source=high/low a directional level penetration is used automatically (crossunder/low and crossover/high). For source=close a standard bidirectional cross is used. Colors always change above/below close. 1. uses plot*, cross*, alertcondition
Pine Script® indicator
by RagingRocketBull
5